Sign In | Join Free | My himfr.com
Home > Embedded Switch Mode Power Supply >

28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm

    Buy cheap 28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm from wholesalers
     
    Buy cheap 28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm from wholesalers
    • Buy cheap 28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm from wholesalers

    28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm

    Ask Lasest Price
    Brand Name : LionRock
    Model Number : TEP 200H1/48
    Payment Terms : TT
    Price : negotiate
    Delivery Time : negotiate
    • Product Details
    • Company Profile

    28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm

    High Efficiency Embedded Switch Mode Power Supply


    Introduction

    TEP 200H1/48 is a DC distribution unit which be used for solar / diesel / grid hybrid scenarios. It contains up to 4 pieces of HFSM modules, 2 pieces of solar modules, DC power distribution board controller SC501 etc. The function is collecting multiple power input from solar, diesel, and grid, and converts it to DC output for loads.


    Features

    - PFC technique features the system high efficiency, energy-saving and up to 0.99 power factor
    - Supports hot-swap for modules of HFSM, MPPT
    - Can be forced power on by pressing the battery switch when only the battery works
    - Detects BLVD & LLVD signals, and detects signals of battery and load loop disconnection
    - Integrated SPD to provide reliable protection for DC power, monitoring and communication ports
    - Detects current signals of batteries, loads and other energy inputs
    - Batteries monitoring and management enables backup batteries well maintained
    - Management priority: solar > grid > battery > DG

    Scenarios
    - Solar / diesel / grid hybrid system


    General Specification

    SystemDimension (W x D x H)483 mm x 400 mm x 312 mm
    Weight28 kg
    Installation ModeIn a 19-inch rack
    Cabling ModeFrom the top, right & left
    Maintenance ModeFrom the front
    InputAC Input200-277/346-480 Vac, three-phase, 50/60 Hz, Max. 20 A
    DC1 Input-40 Vdc to -60 Vdc, Max. 200 A
    Solar Input100 Vdc -430 Vdc, Max. 15Ax2
    OutputVoltage-42 Vdc to -58 Vdc (typical: -48 Vdc)
    CapacityRectifier Max. 200 A
    Solar Max. 100A
    Output DistributionBattery Branch2x200 A breaker
    LLVD Branch2x80 A MCB, 2x63 A MCB
    BLVD Branch1x63 A MCB, 4x32 A MCB, 1x16 A MCB
    Surge ProtectionAC InputN/A
    DC Output20kA (8/20 µs)
    EnvironmentOperating Temperature-40 ºC to +65 ºC (load needs derating to 80% at +45 ºC to +65 ºC, system can start at -40 ºC to -33 ºC without damage)
    Storage Temperature-40 ºC to +70 ºC
    Operating Relative Humidity5% to 95% (no condensation)
    Altitude0 to 2000 m (1 ºC per 200 m temperature derating from 2000 to 4000 m)

    Remark: MPPT: Maximum Power Point Tracking; HFSM: High Frequency Switch Module


    Quality 28kg 200A Embedded Switch Mode Power Supply Module 483x400x312mm for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: 3tech corporate limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)